Linear Bearing Bush - LMH
Containing two units of the standard retainer plate, this type is optimal for locations where a moment load is present.
| Model No. | Ball rows | Main dimensions | Flange perpen-dicularity |
Eccentricity (max) |
Radial clearance tolerance |
Basic load rating | Mass | |||||||||||||
| Inscribed bore diameter | Outer diameter | Overall length | Flange diameter | K | H | B | C | Mounting hole d1×d2×h |
Dynamic C |
Static C0 |
||||||||||
| dr | Tolerance | D | Tolerance | L | Tolerance | D1 | Tolerance | |||||||||||||
| mm | mm | mm | mm | mm | mm | mm | mm | µm | µm | µm | N | N | g | |||||||
| LMH6 | 4 | 6 | 0 -0.009 | 12 | 0 -0.011 | 19 | 0 -0.2 |
28 | 0 -0.2 |
18 | 5 | 20 | — | 3.4×6.5×3.3 | 12 | 12 | -5 | 206 | 265 | 18 |
| LMH8 | 4 | 8 | 15 | 24 | 32 | 21 | 5 | 24 | — | 3.4×6.5×3.3 | 12 | 12 | -5 | 265 | 402 | 28 | ||||
| LMH10 | 4 | 10 | 19 | 0 -0.013 | 29 | 39 | 25 | 6 | 29 | — | 4.5×8×4.4 | 12 | 12 | -5 | 373 | 549 | 50 | |||
| LMH12 | 4 | 12 | 21 | 30 | 42 | 27 | 6 | 32 | — | 4.5×8×4.4 | 12 | 12 | -5 | 412 | 598 | 55 | ||||
| LMH13 | 4 | 13 | 23 | 32 | 43 | 29 | 6 | 33 | — | 4.5×8×4.4 | 12 | 12 | -7 | 510 | 775 | 70 | ||||
| LMH16 | 5 | 16 | 28 | 37 | 48 | 347 | 6 | 31 | 22 | 4.5×8×4.4 | 12 | 12 | -7 | 775 | 1180 | 95 | ||||
| LMH20 | 5 | 20 | 0 -0.010 | 32 | 0 -0.016 | 42 | 54 | 38 | 8 | 36 | 24 | 5.5×9.2×5.4 | 15 | 15 | -9 | 863 | 1370 | 150 | ||
| LMH25 | 6 | 25 | 40 | 59 | 0 -0.3 |
62 | 46 | 8 | 40 | 32 | 5.5×9.2×5.4 | 15 | 15 | -9 | 980 | 1570 | 275 | |||
| LMH30 | 6 | 30 | 45 | 64 | 74 | 51 | 10 | 49 | 35 | 6.6×11×6.5 | 15 | 15 | -9 | 1570 | 2750 | 350 | ||||
